Episodes
In this HVAC podcast episode, hosts Bryan Orr and Matthew Taylor (refrigeration leader and trainer at Kalos Services) discuss oil management and considerations in supermarket refrigeration systems, with a focus on solving & preventing oil issues. They talk about the importance of stable system operation and how oil flows through both active and passive systems in these larger built-up racks. Matthew explains that in a rack system, oil is actively separated and returned to the compressors...
Published 12/28/23
In this podcast, Bryan and Clifton discuss the upcoming transition to A2L refrigerants, like R-32 and R-454B, and what A2L mitigation is going to look like. These mildly flammable refrigerants will be used in place of R-410A for residential air conditioning systems due to an HFC phase-down driven by legislation and international agreements. They explain what mitigation means with A2L systems - sensors will detect refrigerant leaks, and the system will shut off and turn on the blower fan to...
Published 12/21/23
Bryan and Kevin discuss indoor air quality solutions in terms of healthy air supplements vs. pillars of IAQ, drawing an analogy between IAQ supplements like electronic air cleaners and fitness supplements. They talk about why discussing these supplemental products can be controversial since many companies profit from selling them. However, the fundamentals of good IAQ - ventilation, filtration, and humidity control - are proven to work well, just as diet, exercise, and hydration promote good...
Published 12/14/23
In this short episode, Bryan discusses the unique features of hot deck, cold deck systems. These systems have separate heating and cooling components (if not entire systems). Older systems may have completely separate duct systems: one for heating and one for cooling. These ducts would go to each space, and you'd essentially have twice the ductwork you'd expect nowadays. Some systems also have a separate hot deck and cold deck in a single appliance (a bit like gas furnaces with case coils). ...
Published 12/12/23
In this episode of HVAC School, hosts Bryan Orr and Bert discuss practical tips for preventing callbacks and failed inspections in residential HVAC installs and maintenance. Bryan and Bert stress the importance of getting the basics right, like properly cleaning condensate drains, ensuring proper drain pitch, and sealing ducts completely before relying on tapes and mastic to cover gaps. They emphasize verifying full system operation at the end of a job, from checking that drains flow freely...
Published 12/07/23
In this short episode, Bryan talks about the situations when permits are not needed to install HVAC/R (or HVAC/R-related) components. A few codes are universal in residential HVAC, including the International Residential Code (IRC) and the International Mechanical Code (IMC). The local municipality, also known as the authority having jurisdiction (AHJ), chooses which codes to adopt.  You do not need a permit to install plug-in, cord-connected appliances. However, you need UL-listed plugs....
Published 12/05/23
In this podcast, Bryan Orr and Bert discuss various aspects of pool heaters, focusing on issues that make them different from typical HVAC systems. They cover the basics of pool heaters - the main types (heat pumps and gas heaters) and how they operate similarly or differently from things HVAC techs work on regularly. The bulk of the 45-minute podcast looks at common service and troubleshooting situations with pool heaters, which are usually installed by pool contractors initially and not...
Published 11/30/23
In this short episode, Bryan explains the fundamentals of capacitance, focusing on the unit of measure: farads, including micro and pico. Farads are named after scientist Michael Faraday and measure capacitance; one farad represents the capacitance of a capacitor in which one coulomb of charge causes a potential difference of one volt across the plates. Farads measure the storage of electrical energy and indicate the capacitor's ability to create a phase shift. Since farads are large units,...
Published 11/28/23
Bryan Orr hosted a live podcast discussion all about 90% efficient furnaces with HVAC professionals Ty Branaman, Adam Mufich, and Matthew Bruner. They covered the basics of how 90% furnaces work compared to traditional 80% furnaces, troubleshooting tips, and best practices for installation and service. A key difference with 90% furnaces is the addition of a secondary heat exchanger that extracts more heat from the exhaust gases before they go out the flue. This allows the furnace to achieve...
Published 11/23/23
In this short podcast, Bryan breaks down the differences between analog and digital sine waves. Analog readings deal with an unlimited number of values; they are very precise and can have any number of decimals. As a result, the alternating current (AC) analog sine readings have very smooth curves when we read them on an oscilloscope (in the US, we see 60 peak-and-valley cycles per second because the frequency is 60 hertz).  Variable frequency drives (VFDs) and ECMs work with digital...
Published 11/21/23
Bryan Orr interviews Tyler Nelson, an HVAC expert with over 20 years of experience as a contractor. They have an in-depth discussion about combustion analysis and why it is becoming increasingly important for HVAC technicians to utilize this process. The conversation provides an overview of combustion analysis benefits and why HVAC pros should incorporate it into their standard operating procedures. Tyler offers insightful perspectives from his decades of contracting experience, including...
Published 11/09/23
In this short podcast, Bryan talks about checking the charge of a heat pump in heat mode. This skill will become more critical as ambient temperatures get cooler. The most reliable way to check and set the charge regardless of operating mode and season is to weigh the charge. This method is most practical during installation and commissioning, and proper commissioning can prevent issues with charge levels later. Weighing the charge is recommended for big repairs, like major component...
Published 11/07/23
Nikki Krueger and Genry Garcia return to the podcast to talk about a recent IAQ & dehumidification case study on a vintage home in Miami. The home was very clean but had a musty odor and VOC concerns. You can read the case study in the “Literature” section at https://www.santa-fe-products.com/about-us/media-resources/ or https://hvacrschool.com/case-study.  Blower door tests and ZPD revealed that the home was leaky, and the crawlspace was also not properly encapsulated. The options were...
Published 11/02/23
Skilled trades entrepreneur Tommy Mello joins the podcast to talk about creating a business where everyone wins: business owners, employees, vendors, AND customers. Tommy's main motivations in business are relationship-building and helping employees make a good living. Those motivations contribute to the development of company culture; even though cultures build themselves naturally, developing the right leaders will help build a positive company culture that values all employees equally....
Published 10/26/23
Refrigeration Mentor Trevor Matthews returns to the podcast to share some of his tips for supermarket rack service. The supermarket refrigeration world is ripe with high-paying opportunities and uses similar skills that HVAC technicians use daily. Switching from HVAC to refrigeration will require a little bit more attention to some new components, especially controls and control systems. Technically-minded people tend to do well in the refrigeration field regardless of where they come from. ...
Published 10/19/23
In this short episode, Bryan covers traps, vents, and drains. He explains some common misconceptions and best practices for fabricating drains, especially in residential and light commercial structures in Florida. Cleanouts and vents are commonly confused with each other, and people often cap vents and leave cleanouts open. However, cleanouts (which must be capped) will always be before the trap, and vents come after the trap. When you have an indoor air handler, furnace, or fan coil, vents...
Published 10/17/23
HAVEN IAQ founder and CEO Kevin Hart returns to the podcast to discuss cracking the home health comfort code, diving into IAQ’s illusory ideals. Even though the industry has been generating well-thought solutions to common problems, it’s difficult to put those solutions into practice on a large scale. As a result, it’s common to rely on selling “bolt-on” IAQ products, which don’t actually solve systemic IAQ problems. HAVEN’s recent work has also shown that only a few HVAC technicians are...
Published 10/12/23
In this short podcast episode, Bryan goes over a few tubing insulation tips. Tubing insulation is also commonly known as Aeroflex, Armaflex, and Thermaflex—all brand names for black copper line set insulation. We typically have to insulate just the suction line in typical residential split HVAC systems, but you'll typically have to insulate both lines in ductless/VRV/VRF or refrigeration applications. The insulation should be on the tubing before brazing, gluing the ends together (only using...
Published 10/10/23
Jim Fultz returns to the podcast to talk about the new HSI module from White-Rodgers, the 50E47U-843. You can learn more about this new universal HSI module at https://hvacrschool.com/hsimodule.  Hot surface ignition modules control the burner for gas appliances that use hot surface ignition, not just furnaces. Since the HSI module doesn't need to work with a blower fan, it can be used in water heaters, pool heaters, and many more appliances that don't primarily move air (except for...
Published 10/05/23
In this short podcast episode, Bryan talks about locked compressors and hard starts. He explains what actually happens when a compressor locks and covers when and how to use hard starts appropriately.  Locked compressors are compressors that trip on overload during startup; they're considered "locked" because the rotor doesn't turn inside the stator and generates heat instead. The overload opens, but the compressor shell typically does not heat up very much when the overload opens.  When...
Published 10/03/23
Licensed mechanical engineer Tony Amadio joins the podcast to talk about residential exhaust codes and best practices. He also put together a presentation about the topic, which you can view at https://hvacrschool.com/exhaust.  When choosing duct materials for residential exhaust, you will want to stick to sheet metal and mind the gauge; flex ductwork can easily be damaged and will rack up a high total equivalent length in a way that sheet metal will not. Exhaust air should always discharge...
Published 09/28/23
Phil Barr and Nathan Orr join the podcast to talk about wiring refrigerated cases in commercial spaces, including convenience stores and supermarkets. Cases may be medium-temp (or high-temp, in some cases) or low-temp. Medium-temp cases can typically defrost on their own during the off cycle, and low-temp cases may have electric or hot-gas defrost to help get ice off the coil at set intervals. Each system has an evaporator (and fans), compressor, condenser, and metering device (often a TXV...
Published 09/14/23
This podcast is a class taught by Bryan: Things to Keep Out of the System. He covers some installation best practices along the way to keep contaminants and non-condensable gases out of the system. We want to keep air, water, dirt, copper shavings, solvents, and nitrogen out of an operating system. All we want in an operating system is the appropriate oil and refrigerant for the system. Unfortunately, the POE and PVE oil we mostly use in residential systems nowadays are very hygroscopic;...
Published 09/07/23
In this short podcast, Bryan talks about air changes per hour, also known as ACH, and what it means in HVAC design and indoor air quality (IAQ) discussions. ACH tells us how frequently the entire volume of air in a room or structure is replaced; we are referring to the cubic feet of air leaving a space and then being replaced within that same space. If we have a balanced number of cubic feet per minute (CFM) of air supplied to and returned from the room in one hour, we would multiply that...
Published 09/05/23
Roman Baugh joins the podcast to talk about oil return and the refrigerant charge in VRV systems. VRV systems—also known as variable refrigerant volume (or variable refrigerant flow/VRF) systems—have one outdoor unit, one or multiple compressors, and multiple indoor units. The outdoor unit modulates to meet the indoor units’ fluctuating demands. They are versatile and flexible systems. Like parallel racks, VRV systems have long lines and a lot of piping, so oil return and refrigerant charge...
Published 08/31/23