Measuring Heat pump system design with Brendon from Heacol Link to slides for the test can be found here THE TEST RIG Brendon discusses how he first designed the test rig with Ulster University  for testing the heat pump he had built which is specifically adapted for UK climate, the UK's building stock and how the homes in the UK are commonly heated e.g. a combi boiler. When RHI was first introduced, it required heat pumps to have costly certification and sadly Brendon's heat pump had to be put on the back burner... after all, Brendon is extremely busy installing heat pumps for people and has been putting heat pumps in for many years. (Note, if you are an investor in innovation you'd do well to contact Brendon to discuss this heat pump) The test rig uses a 500L thermal store to simulate the internal of a property "it's got inertia, it's got thermal capacity and it's got buffer " A plate heat exchanger connecting the thermal store to the heat pump simulates a radiator system which can have temps and flow rates changed. Brendon describes how this set up is able to run different testing than the excellent Energy House at Salford University and benefit from quick responses to different heating stratagies and scenarios.  TESTING SYSTEM DESIGN  testing a heat pump system with 3rd party controls and buffer tanktesting a heat pump system with weather compensation and buffer tanktesting a heat pump system with weather compensation and no buffer tank e.g. open zone or what has been called direct in the test which can be found hereThe test simulated a house with an 11.5kW heat load. With the first test the heat pump had to run at 50 degree Celsius flow to maintain an internal temp of 21 degrees. In the second test the flow temp dropped to 45d. The final test, with open zone system, no buffer and controlled with manufactures wether compensation controls only required a flow temp coming from the heat pump of 35 degrees C Support the show