This story was originally published on HackerNoon at: https://hackernoon.com/how-to-build-a-gps-tracker-from-scratch-using-arduino-y81o3u79. Combining 3 Arduino boards to create a GPS tracker & data logger. Check more stories related to futurism at: https://hackernoon.com/c/futurism. You can also check exclusive content about #iot, #arduino, #imu, #bluetooth, #sensor, #hardware, #firmware, #gps, and more. This story was written by: @duanebester. Learn more about this writer by checking @duanebester's about page, and for more stories, please visit hackernoon.com. Arduino Nano 33 BLE Sense with an SD card and GPS module for a side project that logs GPS and IMU data. Unbeknownst to me at the time, these boards aren’t footprint-compatible, so I combined them with a breadboard. It took a little while to get all the libraries installed and everything connected appropriately. The biggest challenge was the GPS module. The tricky part here was making sure to remove the DATALOG.CSV file every time we start up.