In this episode we are going to look at configuring Configure a Basic WLAN on the WLC. An organization is centralizing control of their wireless LAN by replacing their standalone access points with lightweight access points (LAP) and a wireless LAN controller (WLC). We will be leading this project and we want to become familiar with the WLC and any potential challenges that may occur during the project. We will configure a WLC by adding a new wireless network and securing it with WPA-2 PSK security. To test the configuration, we will connect a laptop to the WLAN and ping devices on the network. We will be exploring some of the features of a wireless LAN controller. We will create a new WLAN on the controller and implement security on that LAN. Then we will configure a wireless host to connect to the new WLAN through an AP that is under the control of the WLC. Finally, we will verify connectivity, Connect to a wireless LAN controller GUI, Explain some of the information that is available on the WLC Monitor screen, Configure a WLAN on a wireless LAN controller, Implement security on a WLAN, and finally Configure a wireless host to connect to a wireless LAN. Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA). Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started. All my details and contact information can be found on my website, https://KevTechify.com YouTube Channel: https://YouTube.com/KevTechify ------------------------------------------------------- Cisco Certified Network Associate (CCNA) Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE) WLAN Configuration Lab 13.2.7 - Configure a Basic WLAN on the WLC Podcast Number: 55 Season: 1 ------------------------------------------------------- Equipment I like. Home Lab ►► https://kit.co/KevTechify/home-lab Networking Tools ►► https://kit.co/KevTechify/networking-tools Studio Equipment ►► https://kit.co/KevTechify/studio-equipment