Stewart grew up in a Seattle suburb and was an active kid. When he turned 16, he got a beater $500 car and was tasked with keeping it running. He used this car to learn maintenance and slowly acquired mechanical skills. He went to college and continued to modify cars. He was living gin the dorm and didn’t have a place to do the work so he called several shops, but nobody would allow him to do the work at their shop. It was at this point that he shifted from wanting to be a surgeon to owning a...

Nathan grew up in Florida working on cars to help his dad’s business. In his twenties, he moved around always chasing entrepreneurial ventures but wasn’t always focused on cars. He eventually purchased a 2002 WRX Wagon and then he was hooked! The modifications began and he couldn’t get enough. This led to starting a performance shop with two buddies and eventually meeting Doug Wilks who was the owner of Top Speed Performance. Nathan then began organizing tuning appointments for Doug to fly in...

Chris got his career going in cars by doing a buy-in for body kits while he was in college back in 2001. He ran this business all through college and made a decent living. But, after graduating, he became a medical salesman. He worked there up until 2012 when the company he was working for got bought and he was given a buyout payment. That same year, he started Speed by Design. Initially, he wanted to do installs for GTR’s. He soon realized that Oklahoma wasn’t large enough to warrant a...

Its been about 4 years since we last talked to Andre and Ben of HP Academy. Originally, they were focusing on keeping the business small and running it themselves. They soon realized that they needed to hire some extra help. They have grown to 7 people and really helps generate content. Andre and Ben now release interviews each week and have greatly expanded their online education program. The online courses include tuning, engine machining, race car wiring, and vehicle setup. They are...

Bryan Thompson started out in Utah and bought himself a Toyota MR2. He quickly started modifying it to go faster. He ended up going to college to get a Computer Science degree but was cut short because of his love for cars. He then followed a friend to Dallas to begin working at Dinosaur Performance (which later purchased Powerhouse Racing). Soon enough, he was giving the reigns to run Powerhouse Racing. Even though he preferred working on cars, he soon realized he could develop parts that he...

Back in 2017, AJ was humming along and making composite parts for race cars and street enthusiasts. He was approached by a customer who was wanting to help AJ scale the business, so he sold off 49% of the business. They changed the name to RHR Composites, hired 2 people, contracted some aerodynamic parts to be designed, and moved to a larger facility. Along the way, their vision for the future didn’t align so AJ had to buy out his partner to take back 100% of the company. Even though it was a...

Since he was a kid, Matt always wanted to be an entrepreneur. Using inspiration from his childhood, he decided to start a side gig to follow his dreams. His initial idea consisted of 50 latches that allow you to drop the Ford F-150 back seat down to access some secret storage. To his surprise, a Facebook post in a small F-150 group resulted in him selling out rather quickly. So, he began his journey to go at the business full-time. His second product development was a bedside rack system for...

Alejandro and Pablo Moreno didn’t start a shop together but found they could grow a business by working as a team. Alejandro got his engineering degree, worked at Bell Helicopter for a while, and went back to school to get his MBA. In the meantime, Pablo was an auto mechanic, went to flight school, and then decided to start Tandem Automotive with a friend to work on drift cars (hence the name). When Alejandro finished grad school, he was looking for some sort of entrepreneurial venture and...

The business was originally started by their parents who did maintenance and custom work in California. Theresa studied graphic design and worked as a machinist. She went back to work in the family auto body shop and worked in the front end. She taught herself how to pinstripe and paint and continues to do so to this day! Sara was also interested in working at some sort of automotive business and studied business and automotive classes. Strangely enough, she worked at a competitor’s auto body...

On this episode we get a chance to talk with Vadim Belogorodsky from CANtrolls. CANtrolls is a company focused on using CAN interface hardware to make engine swaps easier… but it goes way beyond that! Vadim taught himself to program at age 13 and has since worked on medical devices, oil rigs (doing CAN-based Networking) and most recently with Zero Avia an electric aviation startup. Vadim is a standout in the automotive aftermarket for his ability to get things done. I know him personally to...

Reid has been very busy lately managing several businesses. He still has KSTuned which is the Honda racing side and then has Kaizen Speed for the domestic cars. But his new venture is a weatherproof. solid-state relay that can handle heavy current and is interconnectable. This makes it very easy to daisy chain additional relays without having to run more power wires. He also made it so that you can attach a CAN control module as an option. This gives the customer the ability to keep it very...

Johnny joined the military after high school, served his time, and then used the GI Bill to go to college. He really didn’t know what he wanted to do with his life and began messing with cars and going autocrossing. He worked a short stent helping at a friend’s shop and then got a job at PFC Brakes doing sales and technical support. This job took him all over the world supporting various racing platforms. His next job was at OG Racing selling safety gear and brakes. He was also making custom...

Jonny Mill grew up in a small town in California and moved to LA as soon as he graduated high school. He worked at a talent recruiter and had various jobs in the entertainment industry with advertising and marketing. He always enjoyed cars, but things really took off when he developed The E-Stopp (an electronic parking brake). It was intended for handicap vans but soon found an amazing niche in the automotive restoration market. He was approached by Bryan Harrison of SEMA to compete in the...

Charlie Eklund moved down to Houston, TX to attend Tuner School in 2017. The people at Hennessey Performance saw something special in Charlie and offered him a job in the admissions department for the school. Since then, Charlie has been the face of Tuner School to narrow down the applicants and help them get jobs after graduation. To further help them out, Charlie helps students find part time jobs while taking classes and they even offer a house where the students can rent a room and not...

Richard Tomlin owns a paint, restoration, and fabrication shop south of Houston, Texas called Apex Auto Works. He made a name for his shop by building cages for Spec Miatas and was cranking out one a week. The shop is located on the way to a road course so he catered to the weekend racers and was able to do anything they wanted from complex fab work to paint and body.  He recently embarked on a new venture by developing an absorbent powder called White Pony Dry. It is far superior to kitty...

Bob grew up working on Fords by building engines and going drag racing. He got turned on to the Buick Grand National and became obsessed with going faster! After some frustration with trying to fine tune their setups, Bob decided to start diving into the actual electronic tuning. This opened a whole new world of going faster and picked up a bunch time at the drag strip. He had a couple computer businesses and a shop but was always helping people tune. So, he decided to make it a real...

Dave grew up in Austin and has lived there his whole life. During middle school, he played in a punk rock band (look up The Snobs – Schools Out, Let’s Skate) in the early 2000’s. They organized a tour on the east coast and recorded a couple 7” records. While touring and playing shows, he got turned on to street racing. Having no affinity to school, he dropped out of High School and decided he wanted to play music and race rally cars. After some coaxing, he convinced his dad to “invest” in an...

Dan lived in a house of car enthusiasts in southern California. Both his dad and grandfather owned their own businesses, so Dan was kind of groomed to have his own business as well. In high school, Dan bought a 1968 Mustang Fastback and spent 2 years restoring it with his dad. Once they finished it, Dan went out and took some “professional” pictures of the car, wrote an article, and sent it to every magazine he could find. He was able to get this car featured in some magazines and even on a...

Joe grew up in Oregon and stayed there through college and went to Oregon Tech for Mechanical Engineering with a minor in Business. He never really saw himself owning his own business, so he spent several years working for other companies as an engineer. He spent all his extra time playing with and modifying offroad trucks. He soon realized that he could take a pretty good tax write off if he created a business to research, develop, and sell various parts he was making. In 2008, he made a...

Colin grew up buying and restoring pedal bikes and really enjoyed working with his hands. When his dad took a job in Washington with Boeing, Colin bought a 1940 Ford which was quite a step up from the bicycles. He went to college at Washington State University and preferred to look for car projects instead of studying. Having to haul dead cars all over the place, Colin began looking for better solutions to tie them to the trailer. In 1993, he made the business official and started to sell his...

Chris has been in California his whole life and used to have a job at a company that developed vehicle care products for professional body shops. This gave him intimate knowledge about materials and products for the car care market. One weekend, they were out an event demonstrating some car care products and caught Jay Leno’s eye. He invited them out to his garage to test out their products and shoot a demo video for JayLenosGarage.com. A few months later, Chris get a call that Jay’s detailer...

Will grew up in California and has always had a passion for cars. After high school, he started an apprenticeship at a machine shop working on engines. He went to college, but it just wasn’t for him. He was much more interested in racing than he was in going to class. After a few years, he began working at Centerforce Clutches via a recommendation from a friend of a friend. He started as a machinist and worked his way up the ranks over many years. In the mid 90’s, Centerforce decided to move...

Tony started his car passion by contributing and participating on the LS1.com forum back in 1998. He wasn’t happy with the support of that forum and decided that he could do it better. So, he started LS1Tech.com in 2001. All the while, he was working in the Oil & Gas industry. He continued to teach himself various software systems to allow him to create websites, design graphics, and model parts. He eventually sold LS1Tech.com and started DV8 Motoring to continue to sell parts via...

Bret grew up in Jasper, IN and dabbled with cars during high school. After high school, he worked various jobs in Jasper and then took a job in Florida as a tech rep for the NHRA Drag Racing circuit. A few years later, he started working for a company in California to work for Blower Drive Service. He had been traveling about 300 days per year and decided to settle down back in Jasper with his new wife. He worked a tool truck and was building his own pro-street hot rod. He wanted to be able...