This Episodes Questions: Brians Questions: I have a question on wood storage I have a smaller shop and lots of tools so wood storage space is tight.  I purchase my wood based on what I have planned for the next 2-3 projects and try not to stock many extra boards.  I store them on end leaning against an outside wall.  I often clamp several boards together to help avoid bowing.  So far no problems but I am fairly new to full time woodworking as I retired 2 years ago. Do you see any problems...

This Episodes Questions: Brians Questions: Hello Guys,Love the show so much great information. I have recently got into scroll sawing. I am a comic book fan and I want to start scrolling the comic book art that I love. As you may know comic book art is very colorful. My goal is to start getting enough exotic wood to try and cover as much color as I can. In the mean time I would like to start using stain to color the woods. Are you all aware of any stains that have a good color...

This Episodes Questions: Guys Questions: Gentleman, Chris here @custom_by_chris on Instagram. My shop is a single car garage roughly 11.5’ wide by 22’ long. I’d like to build a miter station along the front wall for my Kapex. Will I regret confining myself to that 11.5’ width? I would position the saw so I have at least 8’ of cutting capacity to one side. I am not doing regular trim work  so don’t frequently deal with long stock.  Lastly, when designing and building the miter station what...

This Episodes Questions: Brians Questions:Hey guys!  Another quick question that I get from others in our field. And I'm interested in your input.   What making basic shaker/frame and panel  cabinet doors, I use the big box, larger ridged router with the FREUD T&G bit set.  I'm tired of cutting the tongues and having blowouts..even when using a backer board when running the rail through the router.    I've leaned in to using the BEADLOCK system from rockler.  It's been great so far.  ...

This Episodes Questions: Brians Questions: Hello guys,Love the podcast. Thank you for your time and expertise!Question on making drawer boxes and other situations where butt joinery is used. How much of a difference would it make if I do not use any glue and rely only on pocket screws / regular screws? Main reason I am asking about skipping glue is because I usually use 2 side prefinished plywood to make drawer boxes so unless I figure out how to remove the finish where the joints are, it...

Brians Questions: I craft Shaker Furniture and then donate it.  I am often gluing up tabletops.  I have seen many discussions around "how to properly joint" the edges of a-joining boards. Am typically using plain sawn cherry.After rough dimensioning, jointing, then planing the individual pieces, and arranging the pieces so they look nice, and hopefully having  the grain run the same way (I finish the tops with a smoothing plane), it comes time to joint those edges that are to be glued.There...

This Episodes Questions: Brians Questions: As a hobbyist who buys wood occasionally, I have never developed the skill of correctly identifying the grain pattern or even the cut type (plain, rift, quarter) in rough cut lumber at lumber yards. It’s all fuzzy and impossible for me to discern. Any tips for a dumb dumb like me? American Bob Hey guys! I started listening to your podcast a couple months ago, and began dabbling in woodworking only a couple months before that. I can't tell you how...

This Episodes Questions: Brians Questions: I really enjoy your podcast.  The information you provide is very informative and helpful.  I am beginning to build more furniture items and considering purchasing a Festool Domino tool for both strength and convenience.  I am having a difficult time, as I'm sure many do, justifying the cost.  My question is: is it that much better and/or stronger than bisquits, dowels, pocket hole screws, fixed tenon, etc., or is this just a "status symbol" tool?...

This Episodes Questions: Brians Questions: I am a hobbyist that wants to start making more polished pieces but am stuck making most of my furniture out of Douglas Fir or cedar. While these are fine options, I want to get into other species like walnut, ash, etc. but am usually priced out when buying one or two boards.I feel like people buy in bulk or something to make the savings work. Could you offer some guidance on purchasing wood that isn’t the normal big box stuff at a fair price? Thx!...

This Episode's Questions: Brians Questions: Hey guys, I am building an arts and crafts style entryway table that is roughly modeled after a Stickley magazine stand. It will have an upper “shelf” that is surrounded on three side by the rails or stretchers on the side and back and is open on the front. The bottom “shelf” is identical. These two shelves are seated into the four legs. The front legs have a full depth groove cut into them that the shelf seats into and the rear legs have a cutout...

This Episodes Questions: Brians Questions: I have a question for you about glueing up table aprons. And I’m mostly referring to large dining tables. The aprons I’m making are generally w 8/4 stock roughly 4” width. I can manage to get the legs and the aprons milled and cut square. All my joinery is w dominoes. Whenever I do the glue up everything is slightly out out square despite everything being square prior to glue up . I have pipe clamps and parallel clamps and have tried both. For some...

This Episodes Questions: Brians Questions: Hey guys thanks for the best podcast You knowledge and wisdomThanks for answering my last question about what project would help build my skillsMy question now is I’m looking for a set of chisels and I don’t know what brand to get i’d save up to buy the brand that to get recommended cause I want a set that lastsThanks for your help and guidance wise ones Ashtin I hope you can help me:I made a 58 inch round table top out of 3/4 inch, good quality...

This Episode's Quesions: Brians Questions: I plan to build a handtool workbench in the future, maybe in a year or so, but as of right now, I do not have any workholding devices.  I have a large assembly table that does have an overhang and the top is 1.25" thick.  I have been using clamps to the top as a stop for planing and it does not work very well.  I also need a way to hold the wood for using chisels, and I haven't bought any dovetailing tools yet because of the lack of workholding...

This Episodes Questions: Guy's Questions: With mothers day around the corner, I plan on knocking out a couple of small jewelry boxes. Mitered corners and book matched grain for a seamless look. 2 questions leading into this project. The first is more likely for Guy. In the past my boxes have been cut to 45.1 degrees to ensure a closed outside corner. My table saw is a jobsite saw and setting a precise angle is extremely difficult. I recently set up a router table and have seen guy use a 45...

This Episodes Questions: Brian's Questions: I'm so curious about the Laguna bandsaws that Guy used at work. Long time listeners of this podcast could easily believe that Laguna bandsaw tables are at knee height and unusable. But I have a Laguna 14/12 and the table is at 35", which seems really normal, and I'm pretty tall. All the other Laguna saws I've used or been around seem about in the same range. Is this not normal? Is Guy freakishly tall? Or an advocate of chest height bandsaw tables?...

This Episode's Questions: Brian's Questions: Gentlemen,First, I hope you all know that the sounds that pop through occasionally from your families in the background don't make a bad podcast; they make you human and THAT is part of what makes your podcast great.On the subject of families, I have 3 young sons (6, 4, 2 years old) that love "helping" with woodworking projects and learning about tools.  The family has outgrown our current dinner table, and I've been tasked with building a new one....

This Episodes Questions: Brian's Questions: Hey guys I have a kinda lengthy question, so new to woodworking and I’ve been listening to your guys podcast and really like it!! Very helpful! Question #1 is it better to have a good table saw blade over a good saw #2 is it better to have a good table saw over a good incra fence!? Back story I have a delta table saw, I got for free from a friend, I was wondering if it’s worth spending the money or save and eventually get a better saw like a...

This Episodes Questions: Brians Questions: Hi guys! Love the podcast, as always. My question for you guys this time is about design. Specifically, it's about design based on that "special" piece of lumber. For example, I purchased a large piece of mahogany in the late 1990's to build electric guitars. I made two guitars from it and was left with a chunk of beautiful lumber that traveled with me for the next 25 years. Two years ago, I bought a mid-sized slab of black locust. I don't make...

This Episodes Questions: Brians Questions I have a question for you about glueing up table aprons. And I’m mostly referring to large dining tables. The aprons I’m making are generally w 8/4 stock roughly 4” width. I can manage to get the legs and the aprons milled and cut square. All my joinery is w dominoes. Whenever I do the glue up everything is slightly out out square despite everything being square prior to glue up . I have pipe clamps and parallel clamps and have tried both. For some...

This Episodes Questions: Brian's Questions: Hi guys.Long term listener. Great pod cast.I recent have a gotten my first 220 table saw. Grizzly 690. It works great and my router table, wood pecker P2.I have a small shop and space always is tight.I am thinking about buying an infra table fence with the router attachment as I can put it off to one side as my cut requirements are less than 24 inches. Mainly 12-18 inches wide as my happy space is projects within 2 ft by 4 ft.Anything larger is...

This Episodes Questions: Brian's Questions: Ashtin here Hey guys love the podcast thank you for putting out good content for all of us to hear My question is I’m very new to the woodworking community I don’t have a shop or a space I work in I use all mobile equipment I do all my work outside I want to know what projects I can do that will help build my skills in and my confidenceI have a DEWALT Dw7491rs Table saw A Bosch router table Ra1181A craftsman jointer Cmew020A wen 6524 spindle and...

This Episodes Listener Questions: Guys Questions: Hello Guy, Huy, and Brian,Loving the content you guys are dishing out. Keep up the good work! I have my sights set on a jointer in the near future as I would like to save time and energy squaring lumber. My preference up until now has generally been to buy new tools and the thought of refurbishing/repairing anything used has not appealed to me. However, the cost difference between a new/used jointer has me thinking differently. Also, the...

This Episodes Question: Guy's Questions: Why hello gentlemen. I have a crazy question for you all. I am about to build a vanity for my bathroom out of poplar. I am leaning towards staining the vanity, but I don’t know what to put on the vanity to protect it from moisture. Do you guys have any suggestions? If so, it would be very helpful.P.S. I am always looking forward to listening to show keep up the amazing advice Thanks, Ethan Thompson ! Hi guys!Alissa’s question from the your last episode...

Guy's Questions: Guys,Recently I’ve been trying to expand my meager wood shop with budget friends older tools. (Most recently a delta x5 6” jointer to fix up and repaint for example).What would you look for when shopping for a used band saw you’re hoping to re-saw with? Where do you look for parts for older/discontinued tools? Any advice on tools that are best to just buy new?Many thanks, Dave Can you share about your design process? My biggest challenge is coming up with designs or finding...