In this episode, Molly is joined by Chris Paskach, who is currently the Flare Master at the Phillips 66 Wood River Refinery in Roxana, Illinois. Although there are only a few short references to relief devices in the PSM standard, the amount of documentation that is required is quite expansive, so Molly and Chris break down the basics for you in this episode. They'll cover the relief system design and design basis information required for PSI, reference information needed to support a process hazard analysis (PHA), relief, vent systems, and device information needed for your mechanical integrity (MI) program, and more. If you have further questions about today's episode, feel free to send us an email at [email protected] or you can connect  with Chris Paskach directly on LinkedIn here.   Also be sure to check out Episode 54 - Pressure Relief Device Concepts with Guest Eric Hirsch and Episode 45 - Piping Requirements for Pressure Relief Devices if you're interested in taking a deeper dive into pressure relief topics. --- Send in a voice message: https://anchor.fm/amplifyyourprocesssafety/message